Your shopping cart is empty.
There was an error retrieving your cart. Please try again later.
B7 Battery Walk-Behind Burnisher
Achieve high performance propane-like gloss results with the ultra-quiet, battery-powered B7 walk-behind floor burnisher. Your facility will benefit from the machine's optimized down pressure and pad speed, and the environment will benefit from a battery floor burnisher that emits no exhaust emissions and maintains indoor air quality with active dust control and HEPA filtration.
Sound Level
As low as 63 dBA
Head Size
24 in / 610 mm, 27 in / 690 mm
There was an error adding item(s) to the cart. Please try again.
B7 FEATURES
HIGHLIGHTS
- Ensure safe, indoor sound levels with the battery floor burnisher’s quiet operation — as low as 63 dBA.
- Maintain indoor air quality with standard, active HEPA dust filtration.
- Change the pad from an ergonomic position using the walk-behind floor burnisher’s 90-degree flip-up head.
- Achieve consistent cleaning performance with optional Set and Forget™ that lets supervisors set the pad down pressure to the optimal level for the facility.
B7 SPECIFICATIONS
-
Head Size: 24 in / 610 mm, 27 in / 690 mm
-
Machine Type: Walk-Behind
-
Productivity: Up to 27000 sq ft / 2500 sq m
-
Filtration Type: HEPA/Active Dust Control
-
Battery Charger Type: On-board, Off-Board
-
Machine Length: 61.5 in / 1562 mm, 63 in / 1600 mm
-
Machine Height: 43 in / 1092 mm
-
Sound Level: As low as 63 dBA
-
Estimated Run Time: Up to 3 Hours
-
Power Source: Battery
-
Pad RPMs: Up to 1875 rpm
-
Machine Width: 30 in / 762 mm, 31.5 in / 800 mm
-
Max Weight: 797 lbs / 362 kg
B7 KEY BENEFITS
Reduce Cost to Clean
Maximize productivity and reduce the cost to clean when you choose an efficient B7 Battery Walk-Behind Floor Burnisher in a size that matches the demands of your floors.
- Increase productivity with optional Set and Forget™ pad pressure for consistent, repeatable results and the battery floor burnisher’s self-propelled operation to minimize operator fatigue.
- Eliminate the need for follow-up dust mopping by relying on the battery floor burnisher’s excellent dust control and HEPA filtration.
- Extend the potential life of your battery using the optional manual battery watering system.
- Reduce downtime training with an easy-to-understand onboard user guide and easy-to-identify yellow touch points.
Maintain Health & Safety
Achieve high-performance burnishing results with an ultra-quiet and ergonomic platform that minimizes exposure to dust particles and carbon monoxide fumes.
- Maintain safe indoor air quality with active dust control and HEPA filtration making the battery floor burnisher safe to use around students, patients, staff and visitors.
- Prevent human exposure to propane fumes by choosing a battery floor burnisher.
- Trust the battery floor burnisher that is ETL listed for the United States and Canada.
- Minimize risks related to propane cylinder transportation, storage and handling by choosing a battery floor burnisher.
- Ensure safe sound levels for operators, and clean in noise-sensitive environments with a quiet battery floor burnisher — as low as 63 dBA.
- Change pads from an ergonomic position with the flip-up had that locks at 90 degrees.
- Minimize the risk of injury while preventing damage to the machine with the dampening shock on the two-way gas enclosure that prevents slamming.
Enhance Facility Image
Create a welcoming environment with gleaming, polished floors using Tennant’s advanced battery floor burnishers that deliver high performance, propane-like gloss results.
- Ensure consistent, predictable cleaning results with optional Set-and-Forget™ controls, or optimize down pressure during operation.
- Minimize burnishing dust in your facility with standard active dust control with HEPA filtration.
- Maximize shine with the B7 Battery Walk-Behind Floor Burnishers that uses battery power to optimize down pressure and pad speed, delivering propane-like high-gloss results.
Easy Operation & Maintenance
Reduce the need for ongoing maintenance, when compared to a propane-powered burnisher, with a battery floor burnisher and onboard charger engineered by Tennant for safe and easy upkeep.
- Transport between locations easily and safely thanks to an innovative design and a burnishing head that tilts up and locks at 45 degrees.
- Center new pads consistently and achieve more uniform results with the 90-degree flip-up head.
- Install the self-adjusting dust control skirt without tools.
- Choose from optional longer-run batteries and sealed batteries.
- Simplify routine maintenance and operator training with easy-to-identify yellow maintenance touch points. Increase battery life and runtime with an optional manual battery watering system for safe and easy battery maintenance.
- Charge the battery with the hood closed due to compartment venting.
Get Heavy-Duty, Compact Performance
Access elevators and make tight turns with the Tennant B5/B7 Battery Walk-Behind Floor Burnisher that has double-wall roto mold construction for standing up to tough environments.
B7 PARTS
1210869
Package of 10 Paper Dust Bags
There was an error adding item(s) to the cart. Please try again.
1203162
HEPA Filter (Active Dust Control only)
There was an error adding item(s) to the cart. Please try again.
1205634
BATTERY, WET,6V 330A C/20, W/HL W/CA[TR]
There was an error adding item(s) to the cart. Please try again.
9010301
BATTERY FILL KIT, 36V, CI [HYDROLINK]
There was an error adding item(s) to the cart. Please try again.
9012740
CHARGER, 36VDC 25A [P/N 1208644, #31]
There was an error adding item(s) to the cart. Please try again.
1073882
CORD, POWER, 14/3, 15A, 15FT BLK [US]
There was an error adding item(s) to the cart. Please try again.
B7 DOCUMENTATION
Intelligent Insights
IRIS® Asset Manager offers intelligent insights and key performance metrics to help manage and monitor your machines and make informed decisions to drive your cleaning operations forward.
B7 RELATED MACHINES
B5
Battery Walk-Behind Burnisher
Delivers a propane-like gloss results without fumes or the worry of propane tank storage. Has a flip-up head that simplifies pad changes.
There was an error adding item(s) to the cart. Please try again.
Productivity
Up to 20000 sq ft / 1858 sq m
Head Size
20 in / 510 mm
Power Cord Length
Filtration Type
HEPA/Active Dust Control
Sound Level
As low as 64 dBA
Pad RPMs
Up to 2100 rpm
BR-2000-DC
Dust Control High-Speed Burnisher
Ultra high-speed burnishing (2000 rpm) delivers an outstanding shine while controlling dust.
There was an error adding item(s) to the cart. Please try again.
Productivity
Up to 10000 sq ft / 929 sq m
Head Size
20 in / 510 mm
Power Cord Length
75 ft / 23 m
Filtration Type
Dust Control
Sound Level
As low as 66 dBA
Pad RPMs
B10
Battery Rider Burnisher
This ride-on version polishes hard floors covering large areas and uses 20 percent more horsepower than the leading competitor.
There was an error adding item(s) to the cart. Please try again.
Productivity
Up to 34375 sq ft / 3197 sq m
Head Size
24 in / 609.6 mm, 27 in / 685.8 mm
Power Cord Length
Filtration Type
HEPA
Sound Level
As low as 69 dBA
Pad RPMs
Request Info
*IRIS Asset Manager is only available on the B7.
